![]() I built a three camera system without the nunchuck, using an Arduno Mega but the PWM frequency is controlled by different timers,Īrduino Mega 2560 timers have no common frequency: Step 3: Connect the Blue, Black, Green, and Yellow Wires Here’s the one I’m using.Ĭonnect the white wire to vin and red wire to ground. The WiiChuck adapter makes it easy to connect the Nunchuck to the Arduino. Step 2: Connect the WiiChuck Adapter, Power and Ground Wires Note: It’s better to cover the exposed soldered connections to prevent the wires from touching. Two independent motors smoothly operate horizontal and vertical motion at adjustable speeds. I cut the controller and cut off the ends of the wires and solder jumpers to it. The Bescor MP-101 Motorized Pan & Tilt Head attaches between a tripod and camera and enables remote panning and tilting of the camera. There are several ways to connect the wires to the Arduino. Pin 7 – Red – Ground Step 1: Prepare the Wires The colors of the wires may be different. Note: Please check for continuity with a multi-meter. ![]() In this tutorial, I’ll show you how to connect the Arduino to the Bescor MP-101.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |